|
Grandstream HandyTone 286 Summary Grandstream HandyTone ATA-286 is an award-winning next generation VoIP analog telephone adaptor based on industry open standards. Built upon innovative technology, Grandstream HandyTone ATA-286 features market leading superb sound quality, compact size, and rich functionalities at highly-affordable price. Grandstream HandyTone-286 Single FXS Port Analog Adapter for VoIP Phone Features: - Support SIP 2.0, TCP/UDP/IP, RTP/RTCP, HTTP, ARP/RARP, ICMP, DNS, DHCP, NTP, TFTP protocols
- Support NAT traversal using IETF STUN and symmetric RTP (compatible with Cisco’s ATA-186, etc)
- Advanced Digital Signal Processing (DSP) to ensure superb hi-fidelity audio quality
- Provides 1 LAN port and 1 FXS interface for any analog telephones, cordless phones, and fax machines
- Support transparent Fax pass-through and in the future T.38 (pending)
- Interoperable with various 3rd party SIP end user device, Proxy/Registrar/Server, and gateway products
- Advanced and patent pending adaptive jitter buffer control, packet delay and loss concealment technology
- Support popular codecs including G.723.1 (5.3K/6.3K), G.729A/B, G.711 (a-law and u-law), G.726, and G.728. Dynamic negotiation of codec and voice payload length
- Support standard voice features such as Caller ID Display or Block, FLASH, in-band and out-of-band DTMF (RFC2833), Dial Plans, off-hook auto dial, early dial, click-to-dial
- Support acoustic echo cancellation, voice mail with indicator, downloadable ring tone (pending)
- Support Silence Suppression, VAD (Voice Activity Detection), CNG (Comfort Noise Generation), Line Echo Cancellation (G.168), and AGC (Automatic Gain Control)
- Support DIGEST authentication and encryption using MD5 and MD5-sess.
- Provide easy configuration thru manual operation (attached analog phone keypad and voice prompt, Web interface) or personalized automated provisioning via central configuration file for mass deployment.
- Support for Layer 2 (802.1Q VLAN, 802.1p) and Layer 3 QoS (ToS, DiffServ, MPLS)
- NAT-friendly remote software upgrade capability (via tftp) even from behind firewalls/NATs
- Support for fail-over SIP server and DNS server (pending)
HandyTone Series comparison table Features | HT-286 | HT-386 | HT-486 | HT-488 | HT-496 | Ethernet Ports | 1 RJ45 (LAN) | 1 RJ45 (LAN) | 2 RJ45 (LAN/WAN) | 2 RJ45 (LAN/WAN) | 2 RJ45 (LAN/WAN) | NAT/Router | No | No | Yes | Yes | Yes | DHCP | Client | Client | Client/Server | Client/Server | Client/Server | FXS Port | 1 | 2 | 1 | 1 | 2 | FXO Port | No | No | No | Yes | No | PSTN Pass-through Port | No | Yes | Yes | Yes | No | Remote Configuration | TFTP/HTTP | TFTP/HTTP | TFTP/HTTP | TFTP/HTTP | TFTP/HTTP | * FXO port allows local and remote PSTN-to-VoIP call origination and VoIP-to-PSTN call termination, automated call routing through PSTN, and power fail-over. PSTN Pass-through allows local PSTN line service for income/outbound call and failover.
|
|